Skip to content
Tools and equipment Grade 12

Mechanical Technology Grade 12 · Term 1 · Weeks 1-10 · 8 questions

Tools and equipment Questions and Answers Grade 12

Mechanical Technology Grade 12 Term 1, Weeks 1-10 8 questions

8 exam questions on this topic from Mechanical Technology Grade 12 past papers, each with a full answer.

What the ATP covers

Use and care of measuring and testing equipment such as gas analysers, multimeters and pressure testers.

Textbook: CAPS Annual Teaching Plan, Grade 12, Term 1: Safety, tools and materials.

Exam Questions

Hide answers Expand all

NSC September 2023 (Welding and Metalwork) Tools and equipment (1) Question 1.6
  • A To reduce friction
  • B To prevent the drill bit from breaking as well as preventing an accident
  • C To keep the cutting tool and workpiece cool
  • D All of the above
Answer

B: To prevent the drill bit from breaking as well as preventing an accident

A loose workpiece can spin or jam on the drill, which can break the bit and injure the operator.

NSC September 2023 (Welding and Metalwork) Tools and equipment (1) Question 2.3
Answer

1,2 mm

A manual guillotine is only suitable for thin sheet metal.

NSC September 2023 (Welding and Metalwork) Tools and equipment (1) Question 4.4
  • A gas withdrawal rate is exceeded.
  • B cylinder content is too low.
  • C cylinder is on its side.
  • D needle valve on the regulator is not fully opened.
Answer

A: gas withdrawal rate is exceeded.

Drawing gas too fast makes it expand quickly and cool, which can freeze the regulator.

NSC September 2023 (Welding and Metalwork) Tools and equipment (8 x 1) Question 6.1
FIGURE 6.1: Welding circuit

FIGURE 6.1 shows the basic operating principles of a welding circuit.

Basic welding circuit with parts labelled A to H. FIGURE 6.1: Welding circuit, Mechanical Technology Grade 12 NSC September 2023 (Welding and Metalwork), Question 6.1
Answer

The parts of the welding circuit are:

  1. A: Current adjuster.
  2. B: Electrode terminal.
  3. C: Electrode holder.
  4. D: Electrode.
  5. E: Arc gap.
  6. F: Earth terminal.
  7. G: Earth clamp.
  8. H: Current scale.

NSC September 2023 (Welding and Metalwork) Tools and equipment (1) Question 6.2
FIGURE 6.1: Welding circuit

FIGURE 6.1 shows the basic operating principles of a welding circuit.

Basic welding circuit with parts labelled A to H. FIGURE 6.1: Welding circuit, Mechanical Technology Grade 12 NSC September 2023 (Welding and Metalwork), Question 6.1
Answer

Metal inert gas

NSC September 2023 (Welding and Metalwork) Tools and equipment (2 x 1) Question 6.3
FIGURE 6.1: Welding circuit

FIGURE 6.1 shows the basic operating principles of a welding circuit.

Basic welding circuit with parts labelled A to H. FIGURE 6.1: Welding circuit, Mechanical Technology Grade 12 NSC September 2023 (Welding and Metalwork), Question 6.1
Answer

Two gases that can be used in MIG welding are:

  1. Carbon dioxide (CO₂).
  2. Argon.

NSC September 2023 (Welding and Metalwork) Tools and equipment (4) Question 6.4
FIGURE 6.1: Welding circuit

FIGURE 6.1 shows the basic operating principles of a welding circuit.

Basic welding circuit with parts labelled A to H. FIGURE 6.1: Welding circuit, Mechanical Technology Grade 12 NSC September 2023 (Welding and Metalwork), Question 6.1
Answer

A power saw is used to rough-cut large sections of metal before they are machined further or used in manufacturing. Its blade works with a reciprocating (back-and-forth) movement.

A band saw has a continuous band that runs in a circular path, so it cuts continuously in one forward direction.

NSC September 2023 (Welding and Metalwork) Tools and equipment (3 x 1) Question 6.5
FIGURE 6.5: Blowtorch

FIGURE 6.5 shows a picture of a blowtorch.

Picture of a blowtorch. FIGURE 6.5: Blowtorch, Mechanical Technology Grade 12 NSC September 2023 (Welding and Metalwork), Question 6.5
Answer

The three main parts of the blowtorch are:

  1. The stock (handle).
  2. The mixer.
  3. The nozzle.

More Mechanical Technology Grade 12 Topics